Service manual

SELECT VALVE (S/N 512811001 & Above) W/Select
Valve (JEM) (Cont’d)
Checking The Relief Valve (Cont’d)
If the relief pressure is not correct, stop the engine. Adjust
the relief valve in the select valve (Item 1) [A]. The select
valve is located at the left side under the control panel.
Remove the cap from the relief valve (Item 1) [B]. Loosen
the locking nut (Item 2) [B]. Turn the adjusting screw
(Item 3) [B] in or out until the correct pressure is reached.
If the correct pressure is not reached remove the relief
valve and inspect the O–rings and back–up rings (Item 4)
[B]. Replace the relief valve if required.
A
P–05201
1
853, 853H BICS Loader
–2–31– Service Manual
B
P–05200
1
4
2
3
P–09199