Service manual

HYDRAULIC CYLINDERS (Cont’d)
Assembly (Cont’d)
Lift Cylinder: Install the head (Item 1) [A], and spacer
(Item 2) [A].
Lift Cylinder: Install the piston (Item 3) [A], and the nut
(Item 4) [A].
Lift Cylinder: Tighten the nut (Item 4) [A] to 600 ft.–lbs.
(814 Nm) torque.
Put the base end of the hydraulic cylinder in a vise.
Tighten the head using a spanner wrench [B] & [C].
NOTE: Clean and dry the threads before install the
nut. Install the new nut from the kit.
B
P–07429
A
P–07428
1
2
4
3
853, 853H Loader
–2–19– Service Manual
C
P–07435