Service manual

LUBRICATING THE LOADER
Procedure
Lubricate the loader as specified in the SERVICE
SCHEDULE, Page 1–3 for the best performance of the
loader.
Record the operating hours each time you lubricate the
Bobcat loader.
Always use a good quality lithium based multi–purpose
grease when you lubricate the loader. Apply the lubricant
until extra grease shows.
Lubricate the following locations on the loader:
1. Rod End Lift Cylinder (Both Sides) [A].
2. Base End Lift Cylinder (Both Sides) [B].
3. Lift Arm Pivot Pin (Both Sides) [C].
4. Base End Tilt Cylinder [D].
1
A
CD–15169
C
CD–15170
3
D
CD–15168
4
853, 853H Loader
–1–27– Service Manual
B
CD–15171
2