Service manual

ENGINE LUBRICATION SYSTEM (Cont’d)
Replacing Oil And Filter (Cont’d)
Put 8 qts. (7,6 L) of oil in the engine. (See Oil Chart, Page
1–16.)
Start the engine and let it run for several minutes. Stop the
engine. Check for leaks at the oil filter. Add oil as needed
if it is not at the top mark on the dipstick.
Always clean up spilled fuel or oil. Keep heat,
flames, sparks or lighted tobacco away from
fuel and oil. Failure to use care around
combustibles can cause explosion or fire
which can result in injury or death.
W–2103–1285
Remove the oil filler cap (Item 1) [A].
A
CD–15114
1
853, 853H Loader
–1–17– Service Manual