Service manual

TIMING GEARCASE COVER (Cont’d)
Removal And Installation (Cont’d)
Remove the bolts from the timing gearcase cover [A].
Installation: Tighten the bolts to 10 ft.–lbs. (14 Nm)
torque.
Use an allen wrench to remove the allen head bolt from
the cover [B].
Installation: Tighten the bolt to 11–17 ft.–lbs. (15–23
Nm) torque.
Remove the timing gearcase cover [C].
Installation: Put the O–ring gasket in the groove and
hold it in position using Form–A–Gasket so it will not fall
out when installing the cover [D].
A
B–08940
C
B–08974
D
B–08956
–7–72–
853, 853H Loader
Service Manual
B
B–08941