Service manual

MAIN BEARINGS (Cont’d)
Installation (Cont’d)
Tighten the crankshaft bearing cap bolts in the correct
sequence [A].
Torque – 116–130 ft.–lbs. (157–176 Nm).
Crankshaft End Play
The end play can be checked by either a feeler gauge [B]
or dial indicator [C].
Standard End Play 0.004 inch (0,10 mm). . . . . . . . . . . .
Limit 0.012 inch (0,30 mm). . . . . . . . . . . . . . . . . . . . . . . .
The fitting of oversize thrust washer can be used to
correct the end play if it is over the specifications.
A
B–08257
10
6
2
3
7
8
4
1
5
9
C
B–03291
–7–66–
853, 853H Loader
Service Manual
B
B–03347