Service manual

FUEL SYSTEM (Cont’d)
Removing Air From The Fuel System
After replacing the fuel filter element or when the fuel tank
has run out of fuel, the air must be removed from the fuel
system prior to starting the engine.
Loosen the air vent plug (Item 1) [A] at the top of the fuel
filter.
Operate the priming bulb (Item 2) [A] until fuel flows from
the filter vent. Tighten the fuel filter vent plug (Item 1) [A].
Loosen the air vent plug at the top of the fuel injection
pump [B].
Again operate the priming bulb (Item 2) [A] until fuel flows
from the air vent plug with no air bubbles showing.
Tighten the air vent plug at the fuel injection pump [B].
Always clean up spilled fuel or oil. Keep heat,
flames, sparks or lighted tobacco away from
fuel and oil. Failure to use care around
combustibles can cause explosion or fire
which can result in injury or death.
W–2103–1285
A
CD–15123
1
2
853, 853H Loader
–1–15– Service Manual
B
CD–10847