Service manual

PISTON AND CONNECTING ROD (Cont’d)

Checking (Cont’d)

Check the connecting rod small end bushing [A].

Standard – 1.2208–1.2211 inch (31,008–31,015 mm)

Check the clearance between the piston pin and

connecting rod [B].

Standard – 0.0003–0.00079 inch (0,008–0,02 mm)

Limit – 0.0002 inch (0,5 mm)

Replace the small end bushing if not within specifications

using a hydraulic press [C].

After installation of a new bushing, finish the bushing bore

to the correct specifications [D].

B–08233

B–08200

B–08203

–7–60–

853, 853H Loader

Service Manual

P–08230