Service manual

PISTON AND CONNECTING ROD (Cont’d)
Checking (Cont’d)
Check the ring gap in the cylinder bore [A].
Standard Limit
Compression 0.008–0.016 inch 0.059 inch
(0,20–0,40 mm) (1,50 mm)
Oil 0.004–0.012 inch 0.059 inch
(0,10–0,30 mm) (1,50 mm)
Check the piston pin diameter [B].
Standard – 1.220 inch (31,0 mm)
Limit – 1.219 inch (30,97 mm)
Check the clearance between piston pin and piston pin
bore [C].
Clearance – 0.00008–0.00006 inch
(0,002–0,015 mm)
Check the connecting rod alignment [D].
Standard – 0.002 inch (0,50 mm) or less
Limit – 0.0079 inch (0,20 mm)
A
B–08229
C
B–08231
D
B–08232
853, 853H Loader
–7–59– Service Manual
B
P–08230