Service manual

CYLINDER HEAD (Cont’d)
Cylinder Head Surface Alignment
Check the surface of the head with the straight edge [A].
Check the head at six different directions [B].
The standard distortion is 0.002 inch (0,05 mm) and the
maximum limit is 0.008 inch (0,20 mm).
When the head distortion exceeds the maximum limit,
regrind the head with a maximum limit of 0.012 inch (0,30
mm).
Exhaust Manifold
If the exhaust manifold has been removed, use the
correct torque sequence and tighten the bolts to 10–17
ft.–lbs. (14–23 Nm) torque [C].
A
B–08198
C
B–08187
4
85
1
2
6
7
3
–7–52–
853, 853H Loader
Service Manual
B
B–08197