Service manual

FUEL INJECTION PUMP (Cont’d)
Removal And Installation (Cont’d)
Do not bend the high pressure fuel injection
tubes when removing or installing them.
I–2029–0289
Disconnect the high pressure fuel lines at the injection
pump [A].
Disconnect the fuel lines at the injectors [B].
Installation: Tighten the fittings on the high pressure fuel
lines to 14–29 ft.–lbs. (19–39 Nm) torque.
Remove the high pressure fuel lines from the engine [C].
Align the mark in the window before removing the
injection pump [A].
Remove the bolts at the front of the timing case cover [D].
Installation: Tighten bolts & nuts to 10–17 ft.–lbs. (14–23
Nm) torque.
A
B–08975
C
B–08915
D
B–08938
–7–44–
853, 853H Loader
Service Manual
B
B–08917