Service manual

ENGINE (Cont’d)

Removal And Installation (Cont’d)

Disconnect the steering cables (Item 1) [A].

Installation: See Page 3–1 for transmission neutral

adjustment.

Mark the high pressure hoses for correct installation.

Disconnect the four high pressure hoses (Item 2) [A] from

the pump.

Disconnect the high pressure hose (Item 1) [B] from the

hydraulic pump.

Disconnect the case drain filter hose (Item 1) [C] from the

pump.

Remove the bolt and nut (Item 2) [B] at the left front

engine mount.

Remove the bolt (Item 1) [D] at the right front engine

mount.

NOTE: The nut is held in the housing and will not

turn (Inset) [D].

Installation: Tighten the mounting bolts and nuts to

90–100 ft.–lbs. (125–130 Nm) torque.

P–04878

P–04879

P–05008

P–04934

–7–32–

853, 853H Loader

Service Manual

P–04870