Service manual

FAN GEARBOX (Cont’d)

Assembly (Cont’d)

Install the small snap ring in the groove above the shims

[A].

Install the gear key in the flange end of the shaft [B].

Align the key and gear. While supporting the bearing on

the other end, press the gear on the shaft until it seats

against the bearing [C].

Install the washer [D].

Put LOCTITE #242 adhesive on the screw threads. Install

and tighten the screw [D].

P–02964

P–02967

P–02966

853, 853H Loader

–7–23– Service Manual

P–02965