Service manual

FAN GEARBOX (Cont’d)

Disassembly (Cont’d)

Short Housing

Remove the end cap [A].

Use care not to damage the housing.

AVOID INJURY OR DEATH

Wear safety goggles to prevent eye injury

when drilling or grinding.

W–2108–1186

Drill an 1/8 inch (3 mm) hole in the seal. Use a slide

hammer tool to remove the seal [B].

Remove the large snap ring from the flange end of the

housing [C].

Remove the large shims from the housing [D].

NOTE: Use the same size and thickness of shims

during assembly.

P–02997

P–02970

P–02969

–7–20–

853, 853H Loader

Service Manual

P–02996