Service manual

RADIATOR (Cont’d)
Removal And Installation (Cont’d)
Disconnect the over–fill hose (Item 1) [A].
If so equipped, disconnect the wires from the water level
sensor (Item 1) [B].
Remove the radiator from the loader.
Installation: Be sure the rubber bumpers (Item 2) [A] are
located at each side (Item 1) [C] before installing the
radiator tabs into the loader frame.
A
P–04904
1
2
C
P–04905
1 1
853, 853H Loader
–7–11– Service Manual
B
P–05191
1
BOSS®