Service manual

AIR CLEANER HOUSING

Removal And Installation

Loosen the hose clamp (Item 1) [A].

Disconnect the hose from the intake manifold.

Loosen the hose clamp (Item 1) [B].

Disconnect the intake hose from the air cleaner housing.

NOTE: The manual indicator (Item 1) [C] is equipped

on the 853 standard loader only.

Remove the two mounting bolts (Item 2) [C] (at the top)

and one mounting bolt at the bottom of the housing.

Remove the air cleaner housing.

NOTE: Disconnect the wires (Item 1) [D] from the

sensor at the rear of the air cleaner housing.

The sensor is equipped on 853 BOSS®

option loaders only.

P–04889

P–04891

P–05194

BOSS®

–7–8–

853, 853H Loader

Service Manual

P–04890