Service manual

STANDARD INSTRUMENT PANEL

Removal And Installation

Pry the rubber light mount loose from the operator cab

(both sides) [A].

Lower the light from the operator cab and locate the three

instrument panel mounting bolts (Item 1) [B] (both sides).

Remove the three mounting bolts (Item 1) [B].

Installation: Be careful not to overtighten the instrument

panel mounting bolts to prevent stripping the threaded

holes in the panels.

Pull the left instrument panel down and disconnect the

wire harness connectors from the panel. Remove the

panel [C].

Repeat steps [A] and [B]. Pull the right instrument panel

down and disconnect the wire harness connectors from

the panel. Remove the panel [D].

Reverse the removal procedure to install the instrument

panel.

P–03995

P–00962

P–00964

–6–22–

853, 853H Loader

Service Manual

P–03955