Service manual

STARTER (Cont’d)
Cleaning And Inspection
Use a brush and air pressure to clean the drive, field coils,
armature and starter housing.
NOTE: DO NOT use solvent to clean the drive
assembly. The solvent will remove the
lubricant and the drive will slip.
Check the following items:
Armature
Broken or burned insulation
Loose connections at commutator
Open or grounded circuits [A] & [B]
Worn shaft or bearings
Rough commutator
Brush Holders
Broken springs
Broken insulation
Spring tension
Field Coils
Broken or burned insulation
Electrical continuity
Brush connections
Drive Gears
Worn teeth
Tooth engagement
A
A–01995
853, 853H Loader
–6–21– Service Manual
B
A–01994