Service manual

FUEL TANK (Cont’d)
Removal And Installation (Cont’d)
Remove the mounting plate (Item 1) [A] for the battery
holddown plate.
Lift the fuel tank and remove it from the loader frame [B].
Fuel Level Sender
Loosen the fuel level sender (Item 1) [B].
Remove the fuel level sender from the fuel tank [C].
Inlet Screen
The inlet screen (Item 1) [D] is located at fuel tank fill
neck.
Disconnect the fuel fill hose.
Remove the inlet screen (Item 1) [D].
Wash the screen in clean solvent.
Dry the screen and check for damage. Replace as
needed.
A
P–04960
1
C
P–07922
D
P–05007
1
–5–16–
853, 853H Loader
Service Manual
B
P–04961
1