Service manual

REAR DOOR (Cont’d)
Hood Removal And Installation
Remove the rear lights harness from the rear door hood
if so equipped.
Remove the mounting bolts from the rear door hood (Item
1) [A].
Installation: Tighten the hood mounting bolts to 25–28
ft.–lbs. (34–38 Nm) torque.
Remove the hood from the rear door.
Bumper Removal And Installation
Remove the rear bumper mounting bolts (Item 1) [B] with
a 7/32 inch allen wrench.
Installation: Tighten the mounting bolts to 180–200
in.–lbs. (21–23 Nm) torque.
Remove the bumper (Item 2) [B] from the rear door.
Door Latch Removal And Installation
Remove the door latch mounting bolts (Item 1) [C] from
the door latch mechanism.
Installation: Tighten the mounting bolts to 80–90 in.–lbs.
(9–10 Nm) torque.
Remove the latch and handle mechanisms from the rear
door.
Door Latch And Catch Adjustment
W–2012–0290
AVOID INJURY
Never service or adjust the machine when the
engine is running unless instructed to do so in
the manual.
The door catch (Item 1) [D] can be adjusted side to side
for alignment with the door latch.
The door latch mechanism (Item 1) [C] can be adjusted
forward or backward for alignment with the door catch.
A
P–05043
1
C
P–05044
1
D
P–05045
1
–5–14–
853, 853H Loader
Service Manual
B
P–04281
2
1