Service manual

DRIVE CHAIN

Removal And Installation

NOTE: It is necessary to remove the rear axle and

drive chain [A]. If the front chain has to be

removed.

Lift and block the loader. (See Page 1–1.)

Raise the operator cab. (See Page 1–1.)

Removing the front panel/steering lever assembly. (See

Page 3–1.)

Remove the center chaincase cover. (See Page 4–5.)

Remove the front and rear chaincase cover. (See Page

4–8.)

Remove the fluid from the chaincase. (See Page 4–27.)

Remove the rear axle. (See Page 4–11.)

Never work on a machine with the lift arms up

unless the lift arms are secured by an approved

lift arm support device. Failure to use an

approved lift arm support device can allow the

lift arms or attachment to fall and cause injury

or death.

W–2059–0598

P–04805

Front Drive

Chain

Rear Drive

Chain

–4–26–

853, 853H Loader

Service Manual