Service manual

REDUCTION GEARCASE (Cont’d)
Assembly (Cont’d)
Install the key and hub on the input shaft [A].
Put LOCTITE #242 adhesive on the bolt threads.
Install the bolt and washer [B].
Tighten the bolt to 210–235 ft.–lbs. (285–305 Nm) torque
[C].
Instal the end plate on the housing [D].
A
B–08750
C
B–08751
D
B–08704
–4–24–
853, 853H Loader
Service Manual
B
B–08752