Service manual

REDUCTION GEARCASE (Cont’d)
Assembly (Cont’d)
Install the spacer [A].
Install the bearing [B].
Put LOCTITE on the bolt.
Install the bolt and washer [C].
Tighten the bolt to 210–235 ft.–lbs. (285–305 Nm) torque
[D].
Put Boretite sealant on the edge of the dust cup and install
the dust cup into the housing.
A
B–08706
C
B–08727
D
B–08721
853, 853H Loader
–4–23– Service Manual
B
B–08707