Service manual

PARKING BRAKE (Cont’d)
Brake Block And Pads
Remove the brake lever [A].
Loosen the brake pad bolts and remove the bolts [B].
Installation: Tighten the bolts to 65–70 ft.–lbs. (88–95
Nm) torque.
Remove the guide and pads [C].
Check the pads for wear and replace them as needed.
Remove the bolts which fasten the brake block to the
cover [D].
Installation: Tighten the bolts to 65–70 ft.–lbs. (88–95
Nm) torque.
A
CD–11020
C
CD–11022
D
CD–11023
–4–6–
853, 853H Loader
Service Manual
B
CD–11021