Service manual

PARKING BRAKE
Removal And Installation
Raise the operator cab. (See Page 1–1.)
Remove the bolt and nut from the lift pedal linkage [A].
Disconnect the lift linkage from the control valve spool
[B].
Remove the pivot bolt from the lift linkage cross–member
and remove the cross–member linkage (Item 1) [C].
Remove the nylon washer (Item 1) [D].
Installation: Check the nylon washer and bushing (Item
2) [D] for wear and replace as needed.
Never work on a machine with the lift arms up
unless the lift arms are secured by an approved
lift arm support device. Failure to use an
approved lift arm support device can allow the
lift arms or attachment to fall and cause injury
or death.
W–2059–0598
A
CD–10989
C
CD–10988
1
D
CD–11017
2
1
–4–4–
853, 853H Loader
Service Manual
B
CD–10937