Service manual

FIXED TENSIONER PULLEY
Removal And Installation
Remove the three belt shield holddown clips (Item 1) [A].
Remove the belt shield.
Loosen the tensioner pulley mounting bolt (Item 1) [B].
Loosen the jam nut and lock nut (Item 2) [B].
Remove the drive belt.
Installation: Tighten the drive belt to the correct
specifications. (See Page 3–41.)
Remove the jam nut and lock nut (Item 1) [C].
Remove the mounting bolt (Item 2) [C].
Remove the tensioner pulley assembly.
A
P–04924
1
1
1
C
P–04929
1
2
853, 853H Loader
–3–33– Service Manual
B
P–04926
1
2