Service manual

SPRING LOADED TENSIONER PULLEY (Cont’d)
Disassembly
Remove the grease cover (Item 1) [A].
Remove the bolt (Item 1) [B], the flat washer (Item 2) [B],
the retainer washer (Item 3) [B], the spring washer (Item
4) [B] and the second retainer washer (Item 3) [B] from
the pulley assembly (Item 5) [B].
Remove the two pins (Item 1) [C] from the hub assembly
(Item 2) [C] only if they have been damaged.
Remove the bracket assembly (Item 3) [C] by tapping on
the shaft (Item 4) [C] with a plastic hammer.
Remove the spring (Item 1) [D] from the bracket (Item 2)
[D].
A
P–08858
1
C
P–08861
1
2
4
3
D
P–08862
2
1
853, 853H Loader
–3–29– Service Manual
B
P–08859
1
4
2
3
5