Service manual

SERIAL NUMBER LOCATIONS
Always use the serial number of the loader when
requesting service information or when ordering parts.
Early or later models (identification made by serial
number) may use different parts, or it may be necessary
to use a different procedure in doing a specific service
operation.
LOADER SERIAL NUMBER
The loader serial number plate is located on the inside of
the left upright, above the grill [A].
Explanation of loader Serial Number:
XXXX
XXXXX
Module 2. – Production
Sequence (Series)
Module 1. – Model/Engine
Version
ENGINE SERIAL NUMBER
The serial number is located above the starter on the
engine block [B].
DELIVERY REPORT
The Delivery Report must be filled out by the dealer and
signed by the owner or operator when the Bobcat loader
is delivered. An explanation of the form must be given to
the owner. Make sure it is filled out completely [C].
The four digit Model/Engine Combination module number
identifies the model number and engine combination.
This number (in parenthesis beside the model number) is
used in the Service Manual to more easily identify the
standard, optional and field accessory equipment
included or available for each specific model.
The five digit Production Sequence Number identifies the
order which the loader is produced.
A
P–00369
C
853, 853H Loader
vii Service Manual
B
P–00370