Service manual

DRIVE BELT
Replacing The Drive Belt
Raise the operator cab. (See Page 1–1.)
Remove the belt shield. (See Page 3–26.)
Loosen the bolt (Item 1) [A] on the idler pulley tensioner
mounting bracket.
Loosen the jam nut (Item 2) [A] and turn the nut (Item 3)
[A] to release the belt tension.
Remove the drive belt from the hydrostatic pump pulley
and flywheel pulley.
Remove the drive belt [B].
Installation: Install the new drive belt and adjust. (See
Page 3–32 or 3–41.)
A
P–04926
3
1
2
853, 853H Loader
–3–27– Service Manual
B
B–05095