Service manual

HYDROSTATIC PUMP (Cont’d)

Replenishing/High Pressure Relief Valve

There are four replenishing/high pressure relief valves

(Item 1) [A] in the hydrostatic pump. Two are located at

the front of the pump and two at the rear of the pump.

See Page 3–4 for valve function.

Remove the plug spring and high pressure relief valve

from the pump [B].

Check for damage and replace as needed.

Ref. Description

1. PLUG

2. O–RING

3. SPRING

4. HIGH PRESSURE RELIEF

P–04936

853, 853H Loader

–3–25– Service Manual

P–04938