Service manual

COLD OIL BY–PASS VALVE (Cont’d)
Removal And Installation (Cont’d)
Disconnect the oil cooler outlet tubeline (shown) and the
front auxiliary valve charge hose (not shown) from
by–pass valve [A].
NOTE: The auxiliary valve charge hose is next to the
oil cooler outlet tubeline on the by–pass
valve. The (S/N 5101) loader without front
auxiliary hydraulics does not have the
auxiliary valve charge hose.
Remove the by–pass valve mounting bolt and remove the
valve [B].
A
CD–11003
B
CD–11004
–3–22–
853, 853H Loader
Service Manual