Service manual

HYDROSTATIC CHARGE OIL FILTER

Removal And Installation

Disconnect the temperature switch wire from the

hydrostatic filter [A].

Disconnect the differential pressure switch wire from the

filter [B].

Remove the inlet tubeline from the hydrostatic filter [C].

Disconnect the charge pump inlet hose from the filter [D].

Never work on a machine with the lift arms up

unless the lift arms are secured by an approved

lift arm support device. Failure to use an

approved lift arm support device can allow the

lift arms or attachment to fall and cause injury

or death.

W–2059–0598

CD–10993

CD–10995

CD–10996

853, 853H Loader

–3–19– Service Manual

CD–10994