Service manual

STEERING LEVERS (Cont’d)

Adjusting The Wheel RPM Forward Compared To

Reverse Travel

Read this adjustment completely to become familiar with

the procedure before beginning the adjustment.

1. Disconnect the two bolts of the pintle links (both

sides) (Item 1) [A].

2. Fully lower steering lever stop and tighten (both

sides) (Item 1) [B].

3. Move the lever to full forward, measure the distance

from the U–bolt to the lock nut. Record this

measurement [C].

EXAMPLE ONLY: 3.66 inch (82,0 mm)

4. Move the lever to full reverse, measure the distance

from the U–bolt to the lock nut. Make a record of this

measurement [D].

EXAMPLE ONLY: 2.76 inch (70,0 mm)

NOTE: Before measuring, move the steering lever a

small amount to be sure the cam is in the

detent pocket with no freeplay.

NOTE: This procedure adjusts the position of the

steering levers in the panel when in neutral.

Levers centered in steering panel give equal

travel forward compared to reverse.

P–07927

MC–01944

FORWARD

3.66 “

(93,0 mm)

MC–01943

REVERSE

2.76 “

(70,0 mm)

853, 853H Loader

–3–11– Service Manual

P–02875