Service manual

STEERING LEVERS (Cont’d)

Disassembly And Assembly (Cont’d)

Check the nylon bushing (Item 1) [A] and replace as

needed.

Assembly: Make sure the wave washer (Item 2) [A] is

between the nylon bushings.

Check and replace the cams (Item 3) [A] if worn or

damaged.

Remove the bolts (Item 1) [B] to remove the steering

shaft mounting bracket (Item 1) [C] and the steering lever

stop plate (Item 2) [C].

NOTE: The cams must not rotate on the mounting

bolts.

To remove the centering mechanism bracket from the

front panel, remove the two nuts and bolts (Item 1) [D].

NOTE: Early S/N loaders do no have thr stop plate

(Item 2) [C].

P–05040

P–05036

P–05038

–3–8–

853, 853H Loader

Service Manual

P–05037