Service manual

STEERING LEVERS
Disassembly And Assembly
Remove the front panel/steering lever assembly. (See
Page 3–5.)
Remove the steering shaft centering mechanism bolt and
nut (Item 1) [A] and spring.
Disconnect the steering shock (Item 1) [B].
Loosen both U–bolts (Item 2) [B] at the steering lever.
Remove the steering lever.
Loosen both U–bolts (Item 1) [C] at the steering lever.
Remove the steering lever.
Assembly: The steering levers must be mounted flush
with the back of the mounting plate (Item 3) [B].
Remove the steering shaft assembly bolts (Item 2) [C]
(both sides).
Remove the steering shaft.
Disassemble the right and left steering shaft from the
cross shaft [D].
Install new nylon bushings (Item 1) [D] as needed at the
ends of the steering shaft.
A
P–05033
1
C
P–05035
1
2
D
P–05039
1
1
853, 853H Loader
–3–7– Service Manual
B
P–05034
3
2
1