Service manual

FRONT PANEL (Cont’d)

Removal And Installation (Cont’d)

Remove the steering cable U–bolt (Item 1) [A].

Disconnect the steering cable ball joint (Item 2) [A].

Remove the steering panel brace (Item 3) [A].

Remove the top mounting bolts (Item 1) [B] (both sides).

Remove the shock absorber mounting bolt (Item 2) [B].

Disconnect the shock absorber panel brace bolt (Item 3)

[B]. Remove panel brace and shock.

Installation: Connect the bottom panel brace (both

sides) prior to connecting shock absorber/panel brace

bolt (Item 3) [B]. Lift upward on rear edge of panel to align

panel and brace.

Remove the steering cable U–bolt (Item 4) [B].

Disconnect the steering cable ball joint (Item 5) [B].

Remove the two mounting bolts (Item 1) [C] at the side

of the front panel (both sides).

Remove the mounting bolt (Item 2) [C] on the bottom of

the front panel.

Remove the front panel.

Installation: Align pedal link grommets in steering panel

and lower cover slots (Item 3) [C].

P–09928

P–09330

–3–6–

853, 853H Loader

Service Manual

P–04743