Instruction manual

46
After installing Weather Shield,
confi rm vents on Weather Shield are
aligned with space above seat back
and all other vents are free of
obstruction. C
CARE AND MAINTENANCE
ARN MAINTENANCE
Check tire pressure before every
use.
CLEANING
The fabric has a stain resistant
treatment that makes most cleanups
easy. Use a sponge with a solution of
mild soap and cold water (maximum
temperature of 100 deg. F / 38 deg.
C). Rinse thoroughly with clean water
to remove soap then air dry. Do not
use detergent.
REGULAR INSPECTIONS
We recommend inspecting your
stroller before every use. Verify
tire pressure. Verify all screws,
attachment points and fasteners are
tight. Check all wheels to be sure
they are securely clamped. Check for
tears or excessive wear in the fabric.
We recommend you take your stroller
to a designated BOB dealer for
periodic inspection and service.
2. Stow Window Cover
Stow window cover in pocket to
expose canopy straps.
3. Pull Canopy Straps
Pull canopy straps and secure to
Velcro strips on back of canopy.
4. Store Canopy
Position rear canopy stay against
handlebar and fold canopy fl ap up
and over canopy, connecting Velcro
strips. Inspect opening at back of
stroller to make sure space between
top of seat back and canopy is
unobstructed.