Material Safety Data Sheet

3. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Component(s)
CAS Number
Percentage*
Naphtha (Petroleum) Hydrotreated Heavy
64742-48-9
98 - 100
N,N Dimethyl-P-Toluidine
99-97-8
1 - 2
* Exact percentage is a trade secret. Concentration range is provided to assist users in providing appropriate protections.
4. FIRST AID MEASURES
Inhalation: Move to fresh air. If not breathing, give artificial respiration. If
respirator irritation, dizziness, nausea or unconsciousness occurs,
seek medical attention.
Skin contact: Wash contact area with soap and water. Remove contaminated clothing.
Launder contaminated clothing before use.
Eye contact: Immediately flush thoroughly with water. If irritation occurs, get medical
attention.
Ingestion: Seek immediate medical attention. Do not induce vomiting.
Symptoms: See Section 11.
Notes to physician: If ingested, material may be aspirated into the lungs and cause chemical
pneumonitis. Treat appropriately.
5. FIRE FIGHTING MEASURES
Extinguishing media: Water spray (fog), foam, dry chemical or carbon dioxide.
Special firefighting procedures: In enclosed spaces, wear a self-contained breathing apparatus. Prevent
. runoff from entering streams, sewers or drinking water supply.
Unusual fire or explosion hazards: Vapors are heavier than air
Hazardous combustion products: Incomplete combustion products, Oxides of carbon, Smoke, Fume
6. ACCIDENTAL RELEASE MEASURES
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected
personnel.
Environmental precautions: Ventilate area. Do not allow product to enter sewer or waterways.
Clean-up methods: Absorb or cover with dry earth, sand or other non-combustible material.
Use clean non-sparking tools to collect absorbed material. Refer to Section
8 "Exposure Controls / Personal Protection" prior to clean up.
7. HANDLING AND STORAGE
Handling: Prevent contact with eyes and avoid contact with skin Avoid breathing vapor
. and mist. Wash thoroughly with soap and water after handling. Material can
. accumulate static charges.
Storage: For safe storage, store between 0 °C (32°F) and 24°C (75°F). .
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Keep container tightly closed until ready for use.
Item number: 151-152 Product name: Insta-Set™
Page 2 of 5