User's Manual

9
w w w . B o b L o n g D i r e c t . c o m
To power on marker:
Press power button once and release.
To turn eyes off:
Pull and hold trigger while powering on marker. LED will ash white then release.
To power off marker:
Press power button and hold. LED will ash orange then red and board will power itself
off.
Congratulations! Your marker comes with one of the most technologically advanced cir-
cuit boards ever made for any paintball marker. The following instructions and diagrams
will teach you how to unleash the potential of the Frenzy 3.0 to let you squeeze every
drop of performance out of your Protege.
Basic 0perations
0nboard LED Indicator
Eyes on. No paintball staged
in Chamber.
Eyes off / Simulate
Low Battery. Change bat-
tery immediately to avoid
failure.
2C Eye ONLY - Bottom
eye tripped. Paintball
properly staged in cham-
ber.
4C Eye ONLY - Top eye
tripped. Also use this to
test top eye.
4C Eye ONLY - Bot-
tom eye tripped. Paint-
ball properly staged in
chamber.
Eye Malfunction. Clean
eyes to resume normal
operation.
NOTE: THE FOLLOWING LEDs ARE FLASHING DURING NORMAL OPERATION!
MARKER ELECTRONICS