User's Manual
w w w . B o b L o n g D i r e c t . c o m
19
Anti Chop Eye Maintenace:
In the event of a chopped ball or debris in the
breech, your Protege eyes may need clean-
ing.
• Remove the eye cover screw, and remove
the eye cover.
• Carefully unscrew the PCB retaining screw
• Gently lift the eye PCB away from the body
of the marker.
• Unplug the main harness from the eye PCB
(be careful to not pull on the wires—this
could potentially damage your harness and\
or eye PCB)
• Remove the eye PCB for cleaning.
• Use a clean cotton swab to clean the sur
face of the eye, dampen the swab with alco
hol if necessary.
• You can safely clean the electronic compo
nents on eye PCB with canned air as well—
however, be careful to not invert the can or
apply direct downward pressure on any com
ponent.
• After the eye has been sufciently cleaned,
reinstall the PCB and reinstall the PCB re
taining screw and eye cover.
1
2
3
4
5