User's Manual

w w w . B o b L o n g D i r e c t . c o m
18
Poppet Maintenance:
• Degas the marker and ensure that there
are no paintballs in the breech or barrel of
the marker.
• Remove your macroline hose from the 90˚
tting on your regulator
• Unscrew your regulator from the Protege
vertical adaptor, and set the vertical regula
tor down.
• Grasp the low pressure regulator to ensure
that it does not eject from the marker upon
removal of its retaining screw.
• Remove the LPR retaining screw from in
side the Protege vertical adaptor, and allow
the LPR assembly to slide out of the mark
er.
• Using a pair of needle nose pliers, remove
the poppet return spring and poppet valve
from the front of the ram sleeve.
• Inspect the surface of the poppet and oring
for excessive wear or nicks, and replace as
necessary.
• Clean debris and excess grease from the
poppet surface, and regrease the poppet or
ing with Dow55.
• Replace the poppet and poppet return
spring into the ram sleeve, and attach the
LPR with the LPR retaining screw.