User's Manual

w w w . B o b L o n g D i r e c t . c o m

HPR Maintenance:

• Degas the marker and ensure that there

are no paintballs in the breech or barrel of

the marker.

• Remove your macroline hose from the 90˚

tting on your regulator

• Unscrew your regulator from the Protege

vertical adaptor, and set your marker

down.

• Grasp the two halves of the regulator, and

unscrew the regulator base in a counter

clockwise fashion.

• Tap the regulator base on a hard, at

surface to allow the regulator piston,

spring stack, spring follower to slide out of

the regulator base.

• Inspect the surface of the piston and oring

for excessive wear or nicks, and replace

as necessary.

• Inspect the interior walls of the regula

tor base—if necessary, use a swab on the

interior of the regulator base to clean de

bris and old grease.

• Regrease the piston with Dow 55, and

gently replace the piston, spring stack,

and spring follower back into the regulator

base.

360 ˚ Inline Regulator:

Your Protege comes equipped with one of the best high pressure regulators on the

market. To ensure the best consistency and the highest ow possible, it is recom-

mended that you clean and relubricate the HPR according to the maintenance sched-

ule.

Proper Washer Stack Layout:

)()()()(