User's Manual
w w w . B o b L o n g D i r e c t . c o m
12
ROF Cap
The ROF (Rate of Fire) cap on the Frenzy 3.0 is simple and intuitive. Controlled
through dipswitch 3, follow the instructions below to program your BPS (Balls Per
Second) Cap Setting:
• Flip dipswitch #3 to ON
• Power up the marker.
• Pull, and hold down the trigger while powering the marker on.
• The LED will now become white; release the trigger. After releasing the trigger, the
LED will turn off, and ash the current BPS Cap setting, and then turn green—indi
cating that it is ready for input.
• Pull the trigger the number of times you wish to set the BPS Cap to (IE: 13 pulls =13
BPS Cap), and wait.
• The board will respond by ashing the setting you just entered, conrming your set
ting.
• Return dipswitch #3 back to the OFF position, and reboot your marker.
1
2 3
4 5
6
1
2 3
4 5
6
ROF Programming Mode ON
ROF Programming Mode OFF