User's Manual

CAUTION: READ ALL WARNINGS BEFORE USING OR ATTEMPTING ANY WORK ON
YOUR M-TAC. SHOULD YOU BE UNSURE AT ANY POINT, STOP AND SEEK
PROFESSIONAL SUPPORT.
Page
5
WARRANTY
Bob Long Technologies warrantees our markers against manufacturing defects. Electrical components
are warranted for a period of 90 days. All solenoids and wire harnesses are tested for function prior to
leaving our factory. Solenoids and wire harnesses will only be warranted at the discretion of Bob Long
Technologies. Only use factory authorized lubricants when maintaining your marker. The use of non-
authorized lubricants or maintenance solutions will void your warranty. The use of Teflon tape as a
sealant for any marker component may internally damage electro-pneumatics. The use of Teflon tape
for sealing a connection, such as a macro fitting, will void your warranty.
When installing aftermarket grips, ensure attachment fasteners DO NOT protrude into internal grip
assembly. Any attachment fasteners protruding into the grip assembly will void your warranty.
For questions concerning your M-TAC or this manual please call [phone].
THINGS THAT VOID YOUR WARRANTY
• Dremels making contact with parts of your marker.
• Unapproved lube in unapproved places. Triflow is approved on the bolt o-rings, Dow 55 on
other o-rings. Other lubes may end up getting on the eyes or through the tubing and to the
solenoid.
• Use of your barrel as a club
• Acts of piracy off the coast of Somalia
• Teflon tape on fittings such as the LPR barb