User's Manual

CAUTION: READ ALL WARNINGS BEFORE USING OR ATTEMPTING ANY WORK ON YOUR VICE.
SHOULD YOU BE UNSURE AT ANY POINT, STOP AND SEEK PROFESSIONAL SUPPORT.
GENERATION 5 MODEL DIFFERENCES:
The fifth generation Intimidator platform, including the Vice and Protégé, share the same basic operation and
underlying technology. While the Protégé provides tournament level performance in a cost effective package, the
Vice brings a fully loaded marker that is lighter and fully equipped. Both are designed, machined, and built in the
USA.
Vice
Protege
Feedneck
LeverLock
T w i s t L o c k
Control Board
Tadao Ryujin
Fr e nz y 4. 0
B o l t
Pillow Bolt
Open Face Bolt
Weight
L i g hte r
Only a snackie cake difference
Ram Sleeve
Integrated
Separate
Comparison of Vice and Protégé Features
The Protégé can be upgraded with the same components as the Vice, with the exception of the ram sleeve. Both
markers accept the Low Pressure Poppet Valve, 4C Eye System, Cam-Drive or Gear-Drive ASAs and other
accessories. The maintenance procedures in this manual apply to both markers.
MAINTENANCE SCHEDULE
Amount of Time
Estimated Cases
of paint
R e c o m m e n d e d U p k e e p
While talking smack with your
friends in between games
• Removing the bolt, and barrel
• Run a swab through the firing chamber
• Put a drop of oil on the bolt o-rings if your friends
are still flapping their gums
• Reinstall bolt
After a day of play
1-2 Cases
• Repeat above steps
• Wipe down marker outside
• Clean and oil bolt
After a Weekend
2-4 Cases
• Repeat above steps
• Remove the Ram Cap and Ram
• Clean debris and old grease from ram interior
• Inspect o-rings for damage
• Clean and grease ram
A Month
10 Cases
• Repeat above steps
• Clean, inspect, and grease HPR P i st o n o-ring
6 Months or when consistency
issues appear
20 Cases
• Clean, inspect, and grease LPR Piston o-ring
• Clean, inspect, and grease poppet shaft o-ring