Manual

Intimidator-13
11. Press the right membrane button to
save the change.
12. Observe in the display window.
3-Burst 0000
14.0/sec 45:00
Note: 3-Burst was used in this
example. Whatever you as the user
select, will appear in the same
position on the display window.
13. Ensure LED located left of the
ON/OFF switch blinking green.
Note
By pressing and holding the right membrane button for approx. 2
seconds before release, will default the firing mode to Full-Auto
regardless of previous mode selected. To return marker to
previous selected mode simply press and hold the right
membrane button for approximately 2 seconds and release.
DIP Switch Settings
DIP Switch settings determine the default settings used by the marker upon power
up. These switches allow the user to customize the markers default settings. To
access the DIP switches, remove the right side grip. DIP switches are located at the
base of the Circuit Board. Reference menu tree below for appropriate settings.
ON
OFF
1 2 3 4 5 6 7 8 9 10
Based on Version 1.4.3
The example above indicates marker
will power up with the following settings:
q Firing Mode: Semi Auto
q Rate of Fire: 14 Shots/sec.
q Forward Dwell: 6 ms
q Ball in place delay: 1 ms
q Tournament Lock: Disengaged
Right Button
1 through 3
Firing Mode
4 and 5
Rate of Fire
6 through 8
Forward Dwell
9
Ball in Place Delay
10
Tournament Lock
off,off
9 Shots/sec.
off,on
10.1 Shots/sec.
on,off
12 Shots/sec.
on,on
14 Shots/sec.
off,off,off
20 ms
off,off,on
18 ms
off,on,off
16 ms
off,on,on
14 ms
on,off,off
12 ms
on,off,on
10 ms
on,on,off
8 ms
on,on,on
6 ms
off,off,off
Semi Auto
off,off,on
3-Burst
off,on,off
6-Burst
off,on,on
Full Auto
on,off,off
Test
on,off,on
Turbo
on,on,off
Reactive
on,on,on
Unused
off
1 ms
on
Bypass Eye
off
Disengaged
on
Engaged