Manual

Intimidator-12

The MODE menu will be the most popular menu option used. For this reason the

factory has defaulted it as the first selectable menu when the membrane buttons are

activated. These procedures will provide familiarization on navigation through the

remaining menus. Procedures to change the firing rate of the Intimidator are as

follows:

Changing the Firing Mode

1. Place the ON/OFF switch to ON.

2. Observe in the Display Window

Bob Long’s

INTIMIDATOR

LCD Ver 1.4.3

Turbo 0000

14.0/sec 45:00

3. Press and hold both membrane

buttons down at the same time

until backlight illuminates.

4. Observe in the Display Window

User Setup→→MODE

5. Press right membrane button.

6. Observe in the Display Window

User Setup→→MODE

Semi-Auto

7. Press the left membrane button to

select the desired firing mode.

8. Once the firing mode is selected

press the right membrane button.

9. Observe in the Display Window

User Setup→→MODE

10. Press the left membrane button

seven times and observe in the

display window.

User Setup→→EXIT

Membrane Buttons

Display Window

Right Button

Membrane Buttons

Left Button