User's Manual

Intimidator-4
COMPONENTS
1. Body Assembly
• Feed Tube (attached w/black max)
• Body
• Decoration Block
2. Bolt Assembly
• Bolt
• 3 x 015 O-Rings
WARNING
Grease Poppet Assembly every 2000 to
3000 rounds fired. Doing this will reduce
cup seal wear. DO NOT use lightweight oil
as lubricant.
3. Poppet Assembly
• Cone Shaped Spring
• Poppet
• 1 x 004 O-Ring
• Cup Seal
WARNING
Grease Ram Assembly every 2000 to 3000
rounds fired. Doing this will reduce O-ring
wear. DO NOT use lightweight oil as
lubricant.
4. Ram Assembly
• 1 x 006 O-Ring
• 1 x 011 O-Ring
• Ram
5. Ram Sleeve
• 2 x 015 O-Ring
• 1 x 011 O-Ring
• Sleeve Cap
• 2 x Barbs w/fiber washers
• Retaining Allen
6. Left Eye Sensor Harness w/female
connector
7. Right Eye Sensor Harness w/male
connector
8. Left/Right Eye Covers
9. Barrel Assembly (2 piece Bob
Long)
Body Assembly
4
006
011
3
004
5
015
011
2
1
015
6
7
8
9