User's Manual

BOB LONG GZ INTIMIDATOR – PAGE 5
MARKER COMPONENTS
1. Body Assembly
q Feed Tube (attached w/black max)
q Body
q Decoration Block
2. Bolt Assembly
q Bolt
q 3 x 015 O-Rings
WARNING
Grease Poppet Assembly every 2000 to
3000 rounds fired. Doing this will reduce
cup seal wear. DO NOT use lightweight oil
as lubricant.
3. Poppet Assembly
q Cone Shaped Spring
q Poppet
q 1 x 004 O-Ring
q Cup Seal
WARNING
Grease Ram Assembly every 2000 to 3000
rounds fired. Doing this will reduce O-ring
wear. DO NOT use lightweight oil as
lubricant.
4. Ram Assembly
q 1 x 006 O-Ring
q 1 x 011 O-Ring
q Ram
5. Ram Sleeve
q 2 x 015 O-Ring
q 1 x 011 O-Ring
q Sleeve Cap
q 2 x Barbs w/fiber washers
q Retaining Allen
6. Left Eye Sensor Harness w/female
connector
7. Right Eye Sensor Harness w/male
connector
8. Left/Right Eye Covers
9. Barrel Assembly (2 piece J&J)
Body Assembly
9
4
006
011
3
004
5
015
011
2
1
015
6
7
8