User's Manual

BOB LONG GZ INTIMIDATOR – PAGE 27
Problem Cause Repair
High-pressure regulator
piston dry.
Lube piston.
Large ram o-ring (rear) is
worn.
Replace o-ring.
Inconsistent velocity.
Paint does not fit barrel. Use appropriate size of
paintball.
Low Battery. Remove and replace
Battery.
When gun is turned to ON,
bolt moves forward and
fires.
Retaining screw for circuit
board is shorting out board.
Remove retaining screw
and install rubber o-ring
(poppet o-ring works fine).
Re-install circuit board
ensuring screw does not
touch board.
Written By:
Bob Crews
Instructional System Design Specialist
808 Plateau Way Modesto, CA. 95358 e-mail [e-mail]